EIGRP - EIGRP Metrics, Packets, and Adjacencies - EIGRP Packet Format
5 important questions on EIGRP - EIGRP Metrics, Packets, and Adjacencies - EIGRP Packet Format
In the EIGRP packet, what values can the Opcode field have?
3 = Query
4 = Reply
5 = Hello/Ack
10 = SIA Query
11 = SIA Reply
What is abbreviation for EIGRP TLV and what does it consist? 5
-EIGRP and TLV versions
-Control information to facilitate reliable multicasting (CR-mode)
-Hold timers
-K-values
-Route reachability information
vochkar
Of what fields consists the EIGRP Packet
- Version (always 2)
- Opcode
- Checksum
- Flags
- Sequence number
- Acknowledgment Number
- Virtual Router ID
- Autonomous system number
- TLV
- Higher grades + faster learning
- Never study anything twice
- 100% sure, 100% understanding
What does the TLV field do?
What are the different TLV types:
- 0x0001 EIGRP Parameters ( General TLV Types )
- 0x0002 Authentication Type ( General TLV Types )
- 0x0003 Sequence ( General TLV Types )
- 0x0004 Software Version ( General TLV Types )
- 0x0005 Next Multicast Sequence ( General TLV Types )
- 0x0102 IPv4 Internal Routes ( IP-Specific TLV Types )
- 0x0103 IPv4 External Routes ( IP-Specific TLV Types )
- 0x0402 IPv6 Internal Routes ( IP-Specific TLV Types )
- 0x0403 IPv6 External Routes ( IP-Specific TLV Types )
- 0x0602 Multi Protocol Internal Routes ( AFI-Specific TLV Types )
- 0x0603 Multi Protocol External Routes ( AFI-Specific TLV Types )
The question on the page originate from the summary of the following study material:
- A unique study and practice tool
- Never study anything twice again
- Get the grades you hope for
- 100% sure, 100% understanding