Wrong questions

13 important questions on Wrong questions

What Copp feature can you configure after applying the control-plane command?

aggregates

http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1155832 

After you enter the control-plane command, you can define aggregate control-plane policing policies for the route processor (RP).

Which two statements about IGMP filter that are operating in access mode are true?

-They can be applied on both the SVI and the access port
-The port filter is always checked first

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/igmpfilt.pdf

Which action must you take to configure encryption for a dynamic VPN?

Configure an FQDN peer in the crypto profile
  • Higher grades + faster learning
  • Never study anything twice
  • 100% sure, 100% understanding
Discover Study Smart

Which two statements about extended ping data patterns are true?

-They can test the link for line code mismatches
-They can test the internal repeater for power issues

https://supportforums.cisco.com/discussion/10739986/extended-ping-data-patterns-what-patterns-test-what

Which three criteria are used for stackwise election of a master switch?

user selected priority
longest uptime
lowest mac adres

Which two statements about the DUID in DHCPv6 are true?


-DUID is carried as DHCPv6 option
-It identifies clients to apply configuration parameters (unsure right answer???)

http://www.cisco.com/c/en/us/products/collateral/iosnxossoftware/enterpriseipv6solution/whitepaper_c11689821.html

Which statements about PMTUD is true?

It is supported by tcp and udp

http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

Which options describes the effect of the command ip route vrf DMZ 192.168.2.0 255.255.255.0 1.1.1.1 global?

next hop is in the global routing table

Which three values can you use to configure an ERSPAN destination session?

source ip address
ID number
VRF

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/lanswitch/configuration/xe-3s/lanswitch-xe-3s-book/lnsw-conf-erspan.html   

An ERSPAN destination session is defined by the following:
  • Session ID
  • Destination ports
  • Source IP address, which is the same as the destination IP address of the corresponding source session
  • ERSPAN flow ID, which is used to match the destination session with the source session

Which two statements about BGP prefix-based outbound filtering are true? (Choose two.)

-It must be configured per address family.
-It can be configured for external peering sessions only.

http://www.cisco.com/c/en/us/td/docs/ios/12_2s/feature/guide/fsbgporf.html#wp1043334

What are two mechanism that directed ARP uses to help resolve IP addresses to hardware addresses? 2

-It uses ICMP redirects to advertise next-hop addresses to foreign hosts
-It removes address-resolution restrictions, allowing dynamic protocols to advertise routing information for the next-hop address

Which two statements about Metro Ethernet services are true?

-EPL is a point-to-point service from one customer site to another across an MPLS backbone.
-EPLAN is a multipoint service that emulates a LAN over an MPLS backbone

Which option is a result of the interface configuration when you enter the command ipv6 address autoconfig default?

a static IPv6 default route pointing to the upstream DHCP server

http://www.cisco.com/c/en/us/support/docs/ip/ip-version-6-ipv6/113141-DHCPv6-00.html

The question on the page originate from the summary of the following study material:

  • A unique study and practice tool
  • Never study anything twice again
  • Get the grades you hope for
  • 100% sure, 100% understanding
Remember faster, study better. Scientifically proven.
Trustpilot Logo